IRR Powder Coating
Hydralon are specialists in quality powder coating and masking, these skills are particularly important when coating cases for electronic equipment.
For specific application we can offer IRR powder coatings which meet the following specification.
POLYESTER N.A.T.O GREEN MATT 0423
This product has been specifically formulated to meet the M.Q.A.D. specification for infra red reflective camouflage coatings. It is approved for use to specification INT DEF STAN 80-122/1 OTAR No. 80-122/154/2/2.
| Colour |
Close Match to NATO Green BS 381C285 |
| Gloss Level |
7-10% (60º head gloss meter) |
| Film Thickness |
40 - 120μm |
| Infra Red Reflectance |
35-40% Reflectance in the 750nm to 1000nm wavelength range |
| Cross Hatch Adhesion |
ISO2409 - Pass Gt0 |
| Impact Resistance (2.5mm) |
BS3900 E3 - No Adhesion Loss |
| Flexibility |
BS3900 E1 - Pass 6mm |
| Cupping test |
ISO 1520 - Pass 8mm |
| Scratch test |
BS 3900 E2 - Pass 4kg |
| Hot Salt Spray Resistance |
ASTM B117 - Pass 1000 Hours |
| Humidity Resistance |
BS3900 F2 - Pass 1000 Hours |
| Artificial Weathering |
ISO11341 - Pass 1000 Hours |
| Chemical Resistance |
Resistant to most acids, alkalis and oils atnormal temperatures. May be affected by Chlorinated solvents |
IRR DESERT TAN MATT 8740
| Description |
A polyester powder coating specifically formulated to meet Federal Standard 33446 |
| Infra-Red Reflectance |
45 ± 5% at all wave lengths 150 - 1200nm |
| Application |
Suitable for mild steel, aluminium and aluminium alloys, stainless steel, galvanised mild steel and zinc alloys |
| Gloss Level |
7 - 10% (60º head) |
|
Film Thickness |
40 - 120μ |
Mechanical Properties
| Adhesion |
ISO2409 - Pass (0) no loss of adhesion |
| Impact Resistance (2.5mm) |
BS3900E3 - No loss of adhesion |
| Flexibility |
BS3900E1 - Pass 6mm |
| Cupping Test |
ISO 1520 - Pass 5mm |
| Scratch Test |
BS3900E2 - Pass 4kg |
Chemical Properties
| Holt Salt Spray Resistance |
ASTM B117 - Pass 1000 hrs |
| Humidity Resistance |
BS3900 F2 - Pass 1000 hrs |
| Chemical Resistance |
Resistant to most acids, alkalis and oils at normal temperature. May be affected by chlorinated solvents and ketones | |